Fujitsu telephone SRS-1050 Manual

PDF Manuals
131 Pages English

Fujitsu telephone SRS-1050
SRS-1050 Local Features ( Chapter 3
Page 3-2
If for any reason you become
confused while working in menu
mode, you can always press REG
(softkey 4) to return to the menus
and start over.
Selecting a Menu Option
You can display and choose
among the thirteen menu options
at any time, as follows:
1. Press REG (softkey 4) to display
the menu options. The screen
looks like this:
1:ONE-TOUCH 2:CALENDAR
3:INITIAL (SELECT 1-13)
To see the next menu screen,
press NEXT (softkey 2):
4:UNA 5:H-FREE
6:HAND/HEAD (SELECT 1-13)
Press NEXT again to see the third
menu:
7:RINGER 8:SPID/TEI
9:MSG-LOG (SELECT 1-13)
Press NEXT again to see the
fourth menu.
10:KEY-ATTR 11:I-COM
12:MIC-OFF (SELECT 1-13)
Press NEXT again to see the fifth
and final menu.
13: PREF
(SELECT 1-13)
Note: Older versions of this
digital set may display
fourteen menu items as
follows:
13: SPEAKER-VOL 14:PREF
(SELECT 1-14)
Press NEXT repeatedly to cycle
through these five menus.
2. To select the option you want,
press the appropriate key(s) on
the numeric keypad to dial 1 to
13 (do not press one of the four
buttons under the screen) and
then press ENTER (softkey 1).
If you notice a mistake after
pressing ENTER and want to
cancel the keypad entry, press
asterisk (*). To clear an entry
before pressing ENTER, press
CLEAR (softkey 3).
3. To exit menu mode, press REG
(softkey 4). If you forget to exit,
menu mode is automatically
canceled after four minutes, or
whenever you pick up the
handset or press SPEAKER.
Whenever REG is pressed, it
either enters or exits menu mode,
no matter what else may be in
progress.
Related Manuals for Fujitsu telephone SRS-1050
F9600 F9600c
Fujitsu telephone F9600 F9600c

For telephone (96 Pages)
280D-HS
Fujitsu telephone 280D-HS

For telephone (2 Pages)
SRS-2100
Fujitsu telephone SRS-2100

For telephone (176 Pages)
F9600
Fujitsu telephone F9600

For telephone (19 Pages)
SRS-9924-ABM
Fujitsu telephone SRS-9924-ABM

For telephone (115 Pages)