McDATA switch 4500 Manual

PDF Manuals
216 Pages English

McDATA switch 4500
3
Configure Threshold Alerts
3-23
Configuring the Switch
4. Select one of the following from the drop-down list under the
Name field:
• Rx Throughput. An alert will occur if the threshold set for
receive throughput is reached.
• Tx Throughput. An alert will occur if the threshold set for
transmit throughput is reached.
• Rx or Tx Throughput. An alert will occur if the threshold set for
either receive or transmit throughput is reached.
5. Click Next.
A new screen appears with additional parameters. The name
configured for the alert appears at the top of the screen.
(Click Previous to return to the previous screen.)
Figure 3-11 New Threshold Alerts Dialog Box - Second Screen
6. Enter a percentage from 1 through 100 for % utilization. When
throughput reaches this percentage of port capacity, a threshold
alert will occur.
7. Enter the amount of cumulative minutes in which the %
utilization should exist during the notification interval before an
alert is generated. You can also select At any time if you want an
alert to occur whenever the set % utilization is reached. The valid
range is 1 to the interval set in step 8 (following).
Table of Contents
Expand All
Related Manuals for McDATA switch 4500
4416
Mcdata switch 4416

For switch (66 Pages)
4314
Mcdata switch 4314

For switch (68 Pages)
3232
Mcdata switch 3232

For switch (612 Pages)
3032
Mcdata switch 3032

For switch (612 Pages)
IPS4300
Mcdata switch IPS4300

For switch (188 Pages)
8832
Mcdata switch 8832

For switch (54 Pages)