Velocity Micro scanner MS-3 Manual

PDF Manuals
38 Pages English

Velocity Micro scanner MS-3
25
Chapter 1: Introduction
Microscan MS-3 Laser Scanner Device Driver User Guide
About device initialization
About this topic When working in device diagnostics software, you are often required to
initialize the device. This topic explains why device initialization is
necessary.
Opening
communications
Initializing a device opens communications with it. For example, if the
device is connected with a serial cable, the COM port is opened, and if
the device is connected with an Ethernet cable, the TCP/IP socket is
connected.
Homing motors Initializing a device homes motors that do not track their position along
their line of travel. Homing a motor moves it until it triggers an event,
called a home flag. This tells the motor its location.
The motors on some devices automatically move to their home
positions when the device is turned on. The motors on other devices
must be initialized to be homed.
Setting profile
parameters
Initializing a device applies relevant parameters set in the device’s
profile.
Setting state and
memory variables
Most devices store variables in software or firmware. Initializing a device
sets these variables to their initial values.
Related topics
For information about... See...
Using Diagnostics
❑ “About diagnostics” on page 11
❑ “Opening diagnostics” on page 12
Workflow for configuring devices “Adding devices” on page 10
Table of Contents
Expand All
Related Manuals for Velocity Micro scanner MS-3