User Manual Primogrill Barbecue - Contact Grill Oval Jr [16/30 Pages]

Primogrill barbecue - contact grill OVAL JR

Cradle Side-Table Assembly

Getting Started

Place the first bracket

on the cradle by

unscrewing the four nuts

located at the metal ring

with the 4 legs of the

cradle. Note that the top of

the brackets will have to

point outward to the sides.

Put each metal support

bracket on the outside of

the leg placing the upper

hole of the bracket through

the screw while replacing

the nut in position. Don’t

tighten yet and don’t place

the bottom screw;

adjustment may be

required.

Place one (D) long screw from the outside of the bracket through the sliding

hole of the shelve hinge. The screw must be placed in from the outer part of

the bracket. Make sure that you insert the long screw into the copper ring

spacer before inserting into shelve hinge. Repeat the same on the other

bracket hole. Secure the screws with a nut and black washer (in between

shelve and bracket) on the top screw and a nut on the bottom screw.

The last step is to secure the

brackets with the large short

screw and the nut

accompanying it.

Hardware

A) 4 Short Screws

B) 4 Black Washers

C) 4 Large Nuts

D) 8 Long Screws

E) 8 Small Nuts

Other

(8) Copper Ring Spacers

(4) Black Brackets