User Manual Profoon Telecommunicatie Cordless Telephone Tx-255 [5/12 Pages]

Profoon Telecommunicatie cordless telephone TX-255

CHECK THE CONTENTS OF THE BOX

BATTERY INSTALLATION

NOTE:

CONNECTING LINE CORDS

Box should contain:

Handset with handset cord and phone base

Telephone line cord

4 AA size 1.5V batteries

User's manual

Bracket

The Caller ID phone requires four 1.5V AA size batteries for LCD display.

1. Remove the battery cover from the back of your Caller ID phone

2. Insert four 1.5V AA size batteries by observing the +/- polarity

marked in the compartment.

3. Replace battery compartment cover.

You can also insert an adaptor for the LCD display (optional).

Plug one end of the supplied modular cord into the line jack. Then

plug the other end into telephone line jack.

INTRODUCTION

the

Using the call back feature

A. Call back the dialled number: The unit can store up to 10 dialled

numbers.

B. Call back the called number: The unit can store minimum 76

called numbers.

(NOTE: If the number is blocked or is

not available, it can not be call backed.)

1. In the state of on-hook, press the button once, the last dialled

number will show on the LCD, then use button to select the

number that you want to dial out.

2. Pick up the handset or press button, the phone number can be

dialled out automatically.

1. Lift the handset or press button, listen for a dial tone.

2. Select the caller that you want to call back by pressing

button.

3. Press the button to dial the phone number shows on the LCD .

In the state of on-hook, use button to select the call you

want to call back, then pick up the handset or press the button, the

phone number can be dialled out automatically.

ManualsOcean

Info

Profoon Telecommunicatie cordless telephone TX-117

Profoon Telecommunicatie cordless telephone PDX-1000

Profoon Telecommunicatie cordless telephone PDX-1400

Profoon Telecommunicatie cordless telephone PDX-1100 series

Profoon Telecommunicatie cordless telephone TX-555

ManualsOcean

Info