Black Box computer hardware LEH1104A-4MMST Manual

PDF Manuals
208 Pages English

Black Box computer hardware LEH1104A-4MMST
724-746-5500 | blackbox.com
Page 148
Chapter 7: Command-Line Management
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use this command to set Chain Protocol to an interface. Use the no parameter with this command to revoke Chain Protocol from
an interface.
3. Command Syntax:
chain port enable
no chain port
4. Example:
The following example sets Chain Protocol to the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#chain port enable
switch_a(config-if)#
VLAN:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set the Switch priority for running chain protocol. Switch with lower priority will run as Master (forwarding)
port. Use the no form of the command to restore default value (1).
3. Command Syntax:
bridge <1-1> chain-vlan <1-4094>
no bridge <1-1> chain-vlan
<1–1> Bridge Group name for bridging.
<1–4094> The VID of the VLAN for chain on the bridge <1-4094>.
4. Example:
The following example sets VLAN ID (1) for chain on bridge GROUP (1):
switch_a(config)#bridge 1 chain-vlan 1
switch_a(config)#
Chain Priority:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
Related Manuals for Black Box computer hardware LEH1104A-4MMST