Black Box computer hardware LEH1104A-4MMST Manual

PDF Manuals
208 Pages English

Black Box computer hardware LEH1104A-4MMST
724-746-5500 | blackbox.com
Page 150
Chapter 7: Command-Line Management
2. Usage:
Use this command to enable Storm Control (broadcast and multicast) for Chain Protocol setting. Use the no form of the com-
mand to disable Storm Control (broadcast and multicast) for Chain Protocol setting.
3. Command Syntax:
bridge GROUP chain-storm enable
no bridge GROUP chain-storm
Group = <1-1> Bridge Group name for bridging.
4. Example:
The following example enables chain storm control for bridge GROUP (1):
switch_a(config)#bridge 1 chain-storm enable
switch_a(config)#
Chain Pass-Through Setting
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set chain pass-through port 1 and chain pass-through port 2.
3. Command Syntax:
chain pass-through IFNAME IFNAME
no chain pass-through
IFNAME Chain pass-through port number 1.
IFNAME Chain pass-through port number 2.
4. Example:
The following example enables the fe3 and fe4 as chain pass-through port 1 and chain pass-through port 2:
switch_a(config)#chain pass-through fe3 fe4
switch_a(config)#
Advanced Setting
Advanced Bridge Configuration:
Bridge bpdu-guard configuration:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
Related Manuals for Black Box computer hardware LEH1104A-4MMST