User Manual Esx Carspeaker Qxe462 [3/4 Pages]

ESX carspeaker QXE462

ENGLISH

INSTALLATION NOTES

The rst step of installing a speaker system is thorough planning. Choose a suitable location for your speaker compo-

nents carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears. Pay also atten-

tion to the position of the seats, headrests and other constructional systems in the interior space of the car.

2. Try to mount the speakers on the same arrangement. They should be installed at the same height and directly across

from each other. Do not mount one speaker higher, lower, further forward or further backward from the opposite

speaker.

3. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the rear of the

speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.

4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker deck.

There should be no gaps between the speaker basket and the mounting surface

5. Please handle the components with care, otherwise they will get damaged.

6. Please pay attention to the correct polarity (+ or -) for all terminals and connections.

7. Never connect the speakers to the electrical ground or with the body of the vehicle.

Speaker Speaker

+ L – + R –

Speaker Outputs

at the Amplier

L R

IMPORTANT:

Please pay attention to the correct polarity (+ or -)

for all terminals and connections.