User Manual Durkopp Adler Sewing Machine 577 [20/24 Pages]

Durkopp Adler sewing machine 577

6. Sewing

NOTE !

Do not start sewing with the machine before is has been fully

assembled and before, among others, all the protective devices has

been installed.!

6.1 Normal sewing process

Start the sewing process

–

Turn on the main switch.

–

If the sewing cage is not lifted, turn the crank until the sewing cage

stands in its rear position ( initial position ). The sewing cage will

be lifted.

–

Insert the material to be sewn.

–

Start the sewing process by treading the pedal forwards

( the sewing cage will be lowered, the buttonhole will be sewn, the

knife will act, the threads will be cut off and the sewing cage will be

lifted )

–

For being able to start a new sewing process, Before the end of

the sewing process, the pedal must be returned to its neutral

position, in order to enable the start of the next sewing cycle.

6.2 Interruption of the sewing cycle

The sewing cycle can be interrupted as follows:

Interruption by the operator

–

By treading the pedal backwards, the sewing process will be

interrupted within the buttonhole.

–

The error message

"_1 0 "

will be displayed.

–

Turn off main switch and eliminate the cause for the interruption.

Interruption by thread breakage

–

The error message

"_0 1 0 "

will be displayed.

–

The sewing cage will be moved, without needle thread, up to the

buttonhole end, the knife and the thread cutter will not act and the

sewing cage will not be lifted.

–

Thread the needle according to chapter 4.1.

Following is to be noted after an interruption

–

If the sewing cage stands in its initial position ( rear position ), it

can be lifted by treading the pedal backwards.

–

If the commenced buttonhole is to be completed by a repair seam,

the sewing cage should not stand in its initial position (rear

position) when the main switch is turned on again, because

otherwise it will be lifted.

Before turning on the main switch, take the sewing cage to the

repair point by turning the crank.

–

If the repair point lies within the second half of the second

buttonhole lip (short before the buttonhole end), a complete

buttonhole will be sewn as a repair seam.

ManualsOcean

Info

Durkopp Adler sewing machine 48

Durkopp Adler sewing machine 467-180

Durkopp Adler sewing machine 506

Durkopp Adler sewing machine 43

Durkopp Adler sewing machine 504

Durkopp Adler sewing machine 1365-5

Durkopp Adler sewing machine 523i

Durkopp Adler sewing machine 1360

Durkopp Adler sewing machine 251-140042

Durkopp Adler sewing machine 274

Durkopp Adler sewing machine 610-10

Durkopp Adler sewing machine 550-16-26

Durkopp Adler sewing machine 558

Durkopp Adler sewing machine 806N

Durkopp Adler sewing machine 272

ManualsOcean

Info