Graco heat pump 332305B Manual

PDF Manuals
76 Pages English

Graco heat pump 332305B
Installation
10 332305B
Choosing an Installation Location
Select a location that will adequately support
the weight of the G3 Pump and lubricant, as
well as all plumbing and electrical connections.
Refer to the two mounting hole layouts provided
in the Mounting Pattern section of this manual,
page 74.
NOTE: The two mounting hole layouts provided
in the Technical Data section show the only cor-
rect installation patterns to use for mounting the
G3. No other installation configurations should
be used.
Use designated mounting holes and provided
configurations only.
Always mount the G3 oil models upright.
If the G3 grease model is going to be operated
in a tilted or inverted position for any period of
time, you must use a model that includes a fol-
lower plate, otherwise the G3 must be mounted
upright. Refer to your model number to confirm
if a follower plate was installed on your pump.
See page 5, Understanding the Model Number
to identify this character in your model number.
Use the three fasteners (included) to secure the
G3 to the mounting surface.
Some installations may require an additional
reservoir support bracket. Consult your Graco
distributor for assistance with this installation.
AUTOMATIC SYSTEM ACTIVATION HAZARD
Unexpected activation of the system could result in serious injury, including skin injection and amputation.
This device has an automatic timer that activates the pump lubrication system when power is connected or when
exiting the programming function. Before you install or remove the lubrication pump from the system, disconnect and
isolate all power supplies and relieve all pressure.
Related Manuals for Graco heat pump 332305B