HP (Hewlett-Packard) personal computer dx2250 Manual

PDF Manuals
162 Pages English

HP (Hewlett-Packard) personal computer dx2250
Mouse does not respond to movement or is too slow.
Cause Solution
3. Use the up or down arrow key to select the Shut Down
option and then press the Enter key.
4. After the shutdown is complete, plug the mouse
connector into the back of the computer (or the keyboard)
and restart.
Program in use has stopped responding to commands. Shut down the computer using the keyboard then restart the
computer.
Mouse may need cleaning. Remove the roller ball cover on the mouse and clean the
internal components.
Mouse may need repair. See the Worldwide Limited Warranty for terms and conditions.
Wireless device error. 1. Check the software, if available, for device status.
2. Check/replace device batteries.
3. Reset receiver and mouse.
Computer is in standby mode. Press the power button to resume from standby mode.
CAUTION: When attempting to resume from
standby mode, do not hold down the power button for
more than four seconds. Otherwise, the computer will
shut down and you will lose any unsaved data.
Mouse will only move vertically, horizontally, or movement is jerky.
Cause Solution
Mouse roller ball or the rotating encoder shafts that make
contact with the ball are dirty.
Remove roller ball cover from the bottom of the mouse and
clean the internal components with a mouse cleaning kit
available from most computer stores.
Table D-10 Solving Mouse Problems (continued)
136 Appendix D Troubleshooting Without Diagnostics ENWW
Table of Contents
Expand All
Related Manuals for HP (Hewlett-Packard) personal computer dx2250