9
OSD (On Screen Display)
& Select OSD.
é Select Normal to activate the continuous
display of the programme number and
extended display of TV channel and programme
information on screen.
Minimum to activate
the display of reduced channel information.
Note: When subtitles is switched on, see Features,
p.13, display of the channel number is not possible
Programme title
Select
Programme title Yes or No.
When selected
Ye s, after the selection of a TV
programme or after pressing the i key on
the remote control, a TV channel which
broadcasts teletext may transmit the name of
the TV channel or the programme title.
Teletext 2.5
Some broadcasters offer the opportunity to
see more colours, other background colours
and nicer pictures in the teletext pages.
& Select Teletext 2.5.
é Press the cursor right to select Teletext 2.5
On
to take advantage of this feature.
“ Press the cursor right again to select Teletext
2.5 Off
if you like the more neutral teletext
layout.
The selection made is valid for all channels
which broadcast teletext 2.5.
Note: It may take a few seconds before teletext
broadcast switches over to Teletext 2.5.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when
Auto Surround is
switched
On.
Subwoofer
Select Ye s if you installed an external
subwoofer. See Connect Peripheral Equipment,
Connect extra subwoofer, p. 20.
Intelligent lights (only with 42PF9986)
Select
Ye s if you want the blue lights in the
keys on top of the TV to illuminate (for a few
seconds) when somebody is within 1-1,5 m of
the TV.
Note:The functioning of Intelligent lights is based on
reflection of moving objects. In this way it will
perform differently dependent on the environment
and type/colour of clothing worn.
Set/Change code
The Child lock feature (see TV, Features, p. 13)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
& Select Set/Change code.
é If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code. Follow the
instructions on screen.
Important:You have forgotten your code !
& Select Change code in the General menu and
press
OK.
é Press the cursor right and enter the overriding
code 8-8-8-8.
“ Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.0
Colour
Select
Colour and press the cursor right.
If
Auto is selected, the respective colour
system will be automatically selected according
to the transmission system.
(If the reception is poor, select another sound
system with the cursor up/down.)
PLL
In rare cases certain TV channels may
reproduce distorted or unstable pictures.
Select
PLL (Phase Locked Loop) to switch to
the setting 2 with the cursor left/right to
restore the picture for the respective
transmission.
England 
Deutschland 
France 
Italia 
Polska 
United Kingdom 
Россия 
Nederland 
España 
Magyarország 
Sverige 
România 
Portugal 
Colombia 
Suomi 
New Zealand 
Česká republika 
Türkiye 
Danmark 
日本