Thales Navigation gps receiver CGRS Manual

PDF Manuals
160 Pages English

Thales Navigation gps receiver CGRS
130 ProMark2 Users Guide
Survey Status - Stop-and-go Screen
The Survey Status – Stop-and-go screen, Figure 4.22, provides important status information
regarding receiver operation and the current data collection session. All important information
about the survey can be viewed from this screen. Depend on the
Survey Status screen to
determine if data is being logged, to start point attribute data logging, to verify the time
remaining for the point attribute data collection session, guide you on the quality of the data
being collected, and provide you with receiver operational status information such as battery
life and remaining memory. The
Survey Status screen is accessed by pressing the Nav/Surv
button when viewing the
Satellite Status screen; the Nav/Surv button and the ESC button
toggle back and forth between the
Survey Status and Satellite Status screens. Table 4.17
describes the screen parameters.
Figure 4.22 Survey Status - Stop-and-go Screen
Table 4.17 Survey Status - Stop-and-go Screen Parameters
Parameter Description
Site ID The Site ID field displays the current site ID assigned for this data session. The field
is display only, it can not be edited.
Remain The Remain field displays the amount of time remaining to complete the logging of
point attributes for the current observation.
# Sats The # Sats field displays the current number of healthy satellites above 10 degrees
elevation being logged into memory.
PDOP The PDOP field displays the PDOP value at any given time, computed from all logged
healthy satellites above 10 degrees elevation.
Table of Contents
Expand All
Related Manuals for Thales Navigation gps receiver CGRS