Thales Navigation gps receiver CGRS Manual

PDF Manuals
160 Pages English

Thales Navigation gps receiver CGRS
Introduction 17
Introduction
• Choose Upload to GPS Unit and press Next (make sure that ProMark2 is connected
to your PC and turned on). By default, MapSend tries to find a receiver on COM1. If
you connected the ProMark2 receiver to any other port, there should be a window
informing you that the receiver was not found. See this window below:
• Press Settings and the following window with available ports should appear:
• You can specify the port and press Tes t. Or you can press Autodetect and the
software will find the receiver and the port itself. Note, that the baud rate of the serial
link depends on the baud rate of the receiver. If you want to upload maps quickly, you
need to increase the baud rate in ProMark2. Then depending on what you chose (Test
Figure 1.19: ProMark2 Connection Error Message
Figure 1.20: Testing Connection to ProMark2
Table of Contents
Expand All
Related Manuals for Thales Navigation gps receiver CGRS
300
Thales Navigation gps receiver 300

For gps receiver (89 Pages)
600
Thales Navigation gps receiver 600

For gps receiver (34 Pages)
CE
Thales Navigation gps receiver CE

For gps receiver (6 Pages)
200
Thales Navigation gps receiver 200

For gps receiver (82 Pages)
Car GPS Receiver
Thales Navigation gps receiver Car GPS Receiver

For gps receiver (48 Pages)
iCGRS
Thales Navigation gps receiver iCGRS

For gps receiver (106 Pages)
Mobile Mapper
Thales Navigation gps receiver Mobile Mapper

For gps receiver (128 Pages)
Meridian Series
Thales Navigation gps receiver Meridian Series

For gps receiver (89 Pages)