Thales Navigation gps receiver CGRS Manual

PDF Manuals
160 Pages English

Thales Navigation gps receiver CGRS
24 Promark2 User’s Guide
Table 2.1 Control Buttons used for Survey Functions
Button Description
ENTER The ENTER button is used to either execute the highlighted function, edit
the highlighted parameter, or enter the highlighted value. To illustrate, refer
to Figure 4.5 on page 110, which shows the Survey Menu screen. The
Point Attribute function has been highlighted by using the up/down
arrows. To execute the Point Attribute function, press the ENTER
button.
Another example, Figure 4.7 on page 112, shows the Point Attribute
screen. The Site ID parameter is highlighted. Press the ENTER button to
edit the site ID.
Another instance is Figure 4.25 on page 136, which shows the edit screen
for entry of the site ID. To enter a value, i.e. the number 1, press the
ENTER button when the value is highlighted.
MENU The MENU button serves one purpose which is to access the Survey
Menu screen, page 110, at any time during survey data collection.
Red power button The power button (red with a picture of a light bulb) serves two purposes:
When pressed and released quickly, it turns the receiver on and off.
When pressed and held for 2 seconds while the receiver is on, it turns on
the screen backlight at the low setting. If pressed and held again for 2
seconds, it sets the backlight to high. Finally, press and hold the button
again for 2 seconds to turn off the backlight.
MARK/GOTO The MARK/GOTO button serves one purpose which is to access the
Point Attribute screen, page 112, at any time during survey data
collection.
NAV/SURV The NAV/SURV button has one purpose which is to toggle between the
Satellite Status screen (page 134) and Survey Status screen (page 128) at
any time during data collection.
ESC The ESC button is used to close a screen, reverting back to the previous
screen. In most cases, any editing of parameters in the screen will not be
saved.
Oval button with four
arrows
The oval shaped arrows button is used to highlight the function you wish to
execute or highlight the value you wish to enter. This is illustrated in the
Mode screen in Figure 4.3 on page 108, which lets you operate either in
Survey mode or Navigate mode. In this screen, the up/down arrows allow
you to toggle between Survey or Navigate.
In Figure 4.25 on page 136, you see the edit screen for entry of a point
description. By using the up/down and left/right arrows, you can highlight
either a value to enter, i.e. the number 1, or you can highlight a function to
execute, i.e. OK
Table of Contents
Expand All
Related Manuals for Thales Navigation gps receiver CGRS
300
Thales Navigation gps receiver 300

For gps receiver (89 Pages)
600
Thales Navigation gps receiver 600

For gps receiver (34 Pages)
CE
Thales Navigation gps receiver CE

For gps receiver (6 Pages)
200
Thales Navigation gps receiver 200

For gps receiver (82 Pages)
Car GPS Receiver
Thales Navigation gps receiver Car GPS Receiver

For gps receiver (48 Pages)
iCGRS
Thales Navigation gps receiver iCGRS

For gps receiver (106 Pages)
Mobile Mapper
Thales Navigation gps receiver Mobile Mapper

For gps receiver (128 Pages)
Meridian Series
Thales Navigation gps receiver Meridian Series

For gps receiver (89 Pages)