Thales Navigation gps receiver CGRS Manual

PDF Manuals
160 Pages English

Thales Navigation gps receiver CGRS
82 Promark2 User’s Guide
The
Point Attribute screen lets you enter attribute information for the survey point
you are about to observe. The attribute information comprises the following
parameters:
• A 4-character site ID. You must assign a site ID to each point surveyed in your
project.
• A site occupation timer that counts down in seconds.
• An optional 20-character narrative description of this point.
• An optional initialization setting; either no initialization, a known point or an
initializer bar point.
• An optional control point setting. Set to <Yes> if the point is a control point. The
site ID is copied to the known site ID table.
A unique aspect and an absolutely essential step for a successful stop-and-go survey
is the initialization process. The stop-and-go rover must be initialized prior to
surveying any points. The initialization can be an observation on the initialization
bar, a known point, or a new point. The following example is an initialization using
the initialization bar.
From the
Point Attribute screen, highlight Initialize and press ENTER to bring up
the
Init Mode screen, Figure 3.45.
Highlight
Bar and select Save. The Point Attribute screen will be shown (Figure
Figure 3.45 Init Mode Screen
Table of Contents
Expand All
Related Manuals for Thales Navigation gps receiver CGRS
300
Thales Navigation gps receiver 300

For gps receiver (89 Pages)
600
Thales Navigation gps receiver 600

For gps receiver (34 Pages)
CE
Thales Navigation gps receiver CE

For gps receiver (6 Pages)
200
Thales Navigation gps receiver 200

For gps receiver (82 Pages)
Car GPS Receiver
Thales Navigation gps receiver Car GPS Receiver

For gps receiver (48 Pages)
iCGRS
Thales Navigation gps receiver iCGRS

For gps receiver (106 Pages)
Mobile Mapper
Thales Navigation gps receiver Mobile Mapper

For gps receiver (128 Pages)
Meridian Series
Thales Navigation gps receiver Meridian Series

For gps receiver (89 Pages)